Install The Server Into The Rack - HPE ProLiant ML110 Gen10 User Manual

g. Repeat steps a-f to fasten the other mounting rail.
h. Make sure that both rails are mounted at the same vertical position on both sides of the rack.
5. Slide the server tray into the rack.
The rails will click and lock into place when the tray is properly engaged.

Install the server into the rack

Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
Procedure
1. Grasp the tray notch and extend the server tray out of the rack.
Hardware options installation
55