2.
Install the chassis into the rack.
3.
If removed, install the server blanks.
4.
Install the servers.
5.
Install the power supplies.
6.
If removed, install the RCM module.
7.
Install the hot-plug drives.
8.
If removed, install the front bezel.
9.
Connect all peripheral cables to the servers and chassis.
10. Connect each power cord to the chassis.
11. Connect each power cord to the power source.
12. Power up the servers.
Install the chassis into the rack
Prerequisites
Before you perform this procedure, review the rack warnings and cautions.
Procedure
1.
Install the chassis into the rack.
40
Operations