Installing The Mass Flow Meter - Ametek 5830 User Manual

Installing the Mass Flow Meter

1. Connect the new Flow Meter to the sample manifold plate.
2. Reconnect the 1/16-inch fittings to the inlet and outlet of the new Flow
3. Reconnect the cable to the Flow Meter.
4. Place the sample manifold plate back in the Oven and secure with the four
5. Reconnect all four (4) 1/16-inch fittings on the bracket in the center of the
6. Replace the Sample Oven Cover, and secure it with the two (2) nuts.
7. Replace the Analyzer Cover, and secure it with the mounting nuts.
C abl e C onnection
Fl at H ead M achine Scre w
I nsert f ro m un der sa mple m ani f ol d
pl ate into
Figure 4-4.
5830 Mass Flow Meter.
4-8 | 5830 Moisture Analyzer
Meter.
(4) mounting screws.
Oven.
Reducer Fittin g
2 per fl o wm eter
botto m o f fl o wm eter
- 2 pl aces
C omp res sion Fittin g
f ro m Sample Syste m
PN 583054901, Rev YA