Table of Contents
Advertisement
Pre-Installation Requirements
Personnel Technical Level Required for Installation
Installation must be performed by qualified persons in accordance with local
electrical safety codes (i.e., NEC, CEC, IEC 60079-14), where applicable. Prior to
installation please consult the local codes in order to understand what is ac-
ceptable. To the extent this information is not consistent with local codes, the
local codes should be followed. It is recommended that only trained personnel
perform these installation steps.
PN 903-8820, Rev A
Installing the 993X Analyzer
Installation drawings in this section are for typical installations.
Customer-specific drawings supplied with the system supersede the
drawings included here.
The installation of the 993X Gas Analyzer must be in accordance with
all of the customer (end user) and local regulatory standards and
procedures. There are no operator-serviceable components inside the
993X Analyzer. Refer service requirements to qualified personnel.
Read this entire section before beginning installation of the 993X
Analyzer. Failure to do so, and / or use of the 993X Analyzer in a man-
ner not specified in this manual, may impair the protection against
fire, electrical shock, and personal injury originally provided by this
equipment.
|
EH&S
15
Advertisement
Table of Contents
Troubleshooting
