Replacing The Pilot Valve Manifold; Reinstalling The Electronics Module - Ametek 5830 User Manual

Replacing the Pilot Valve Manifold

1. Position the Pilot Valve Manifold on the Electronics Module mounting
2. Connect the tubing you identified and removed earlier. Make sure that you
3. Secure the Pilot Valve Manifold to the sample manifold plate using the

Reinstalling the Electronics Module

Once you have serviced the various components in the Electronics Module,
reassemble the analyzer.
1. Carefully reposition the Electronics Module above and to the front of the
2. Secure the mounting plate of the Electronics Module to the analyzer as-
PN 583054901, Rev YA
plate. Secure it with the two (2) screws you removed earlier.
are connecting the correct tubing to each valve.
Phillips-head captured screws.
analyzer. Lower the module into the analyzer so the screws at the four
corners can be inserted.
sembly using the four (4) captured screws you removed earlier.
Maintenance and Troubleshooting | 4-23