Table of Contents
Advertisement
PC Communications Setup Options
Figure 3-8.
PC Serial Communications
setup screen.
Device
PN 583054901, Rev YA
Displays information that has been configured from the Serial Port Con-
figuration dialog box.
Click the Setup button to configure PC Communications. The Serial Port
Communication screen opens (Figure 3-8).
Port
Select the COM port on your computer where the connection to the
analyzer is installed.
Baud Rate
Select the baud rate at which data will be transferred.
RS-232 Port
Click if the analyzer is connected to an RS-232 port.
RS-485 Port
Click if the analyzer is connected to an RS-485 port.
Address
Type the network address to which the analyzer is connected.
To save PC Communications settings, click OK.
To abort changes you have made, click Cancel.
Name
Type in a name for the analyzer.
Description
Type in a description for the analyzer.
Save configuration button
Save the analyzer's internal parameters to a file. The Save As dialog
box opens so that you can name and save the file.
|
Controller/Interface
3-17
Advertisement
Table of Contents
