Table of Contents
Advertisement
Controller/Communications
All analyzer functions are controlled by microprocessors housed within the
analyzer. These include:
•
•
•
The 5830 Moisture Analyzer is configured, and analyzer parameters are set, by
using either the analyzer display, keypad and function keys, or using an exter-
nal PC.
•
•
•
1-2 | 5830 Moisture Analyzer
One (1) fully configurable Analog Output (4–20 mA) that can be self-pow-
ered or externally powered.
Three (3) alarm contacts (Data Valid, Concentration Alarm, and System
Alarm).
One (1) RS-232 or one (1) RS-485 serial interface provides communication
between the analyzer and your recording or data acquisition equipment.
4-line x 20-character LCD display that provides moisture data, system oper-
ating parameters, system messages, and alarm conditions.
An 18-button keypad on the front of the unit that is used to set or change
operating parameters and system values.
Serial interface to an external PC.
PN 583054901, Rev YA
Advertisement
Table of Contents
