Table of Contents
Advertisement
Set Clock (Time Synchronization)
Set Dryer Production Code button
Figure 3-12.1.
Dryer and Moisture Generator
code entry screens.
Set Moisture Generator Production Code
Figure 3-12.2.
Dryer and Moisture Generator
code entry screens.
Verification Duration
Zero Duration
3-24 | 5830 Moisture Analyzer
Click Set Clock to synchronize the clock within the analyzer with the PC.
The Time Synchronization box opens with the PC time and date and the
analyzer time and date. Click Synchronize to set the time, or click Cancel
to close the box.
Click to enter the Dryer Production Code for the dryer that is installed in
the analyzer. Click OK to accept.
You must enter a new dryer code each time you replace the dryer.
Click to enter the Moisture Generator Production Code. Click OK to ac-
cept.
Enter the Verification duration in minutes. The system defaults to the mini-
mum time required.
Enter the zero duration in minutes. The system defaults to the minimum
time required.
PN 583054901, Rev YA
Advertisement
Table of Contents
