Table of Contents
Advertisement
Config Key
The Config key is used to define device and communication settings.
Figure 3-6.1.
Main Menu, Config key.
Display
Select the format for the display you want to use.
Figure 3-6.2.
Display menu.
Contrast
Back Light
Font
3-6 | 5830 Moisture Analyzer
Config
Display
Enter a value from '1' to '9' . The default is '5' .
Select On or Off. The default is On.
This is a factory-set parameter that identifies the type used for the display
on the analyzer.
CONFIG
Display
Communication
Sample Gas
Clock
Zero Schedule
Verify Schedule
Production
Codes
Moisture Unit
System Test
Enter Value
Contrast
1 to 9
On
Back Light
Off
Enter Value
Font
0 or 1
PN 583054901, Rev YA
Advertisement
Table of Contents
