Reversing The Image (Mirror Image) - Sharp MX-5500N Manual

REVERSING THE IMAGE (Mirror Image)

This feature is used to make a copy that is a mirror image of the original.
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the
(3) Touch the [Image Edit] key.
☞
[Image Edit] KEY
Special Modes
Image Edit
3
Photo Repeat
A3
Full Bleed
4
To cancel scanning and copying...
Press the [STOP] key (
To cancel a mirror image setting...
Touch the [Mirror Image] key in the screen of step 3 so that it is not highlighted.
Original
keys to switch through the screens.
(page 104)
(1) (2)
Multi-Page Mirror
Enlargement Image
Centring
or
).
Mirror image copy
Select Mirror Image.
(1) Touch the [Mirror Image] key so that it is
OK
highlighted.
OK
(2) Touch the [OK] key.
You will return to the special modes screen. Touch the
[OK] key to return to the base screen of copy mode.
Press the [COLOUR START] key (
or the [BLACK & WHITE START] key (
Copying will begin.
If you are using the document glass to copy multiple original
pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [START]
key. Repeat until all pages have been scanned and then touch the
[Read-End] key. (For the second original and following originals,
use the same [START] key as you did for the first original.
110
)
).