Table Of Contents - Olivetti d-Copia 3002MF plus Service Manual

(6) Document table (DT-730(B))
Document table installation requires the following parts.
Document table (DT-730(B))
Bundled parts of Document table
Tray stay ..................................................................1 pc
Tray mounting plate .................................................1 pc
Tray cover ................................................................1 pc
Tray lower cover.......................................................1 pc
Tray fixing plate........................................................1 pc
Sheet........................................................................2 pc
Pin............................................................................2 pc
Nut M4 *1 ................................................................2 pc
Screw (M4x8 screw with the binding head) .............7 pc
Screw (M4x14 screw with the binding head) ...........2 pc
*1: Not used in this model.
Procedures
1. Turn the power switch off and disconnect the power plug.
2. Attach the tray stay by using two screws.
Service Manual
Parts Number
1
Tray stay
Screw
Figure 1-2-29
1-2-24
Parts number
B4571 000
Screw
Y118240-1