Table of Contents
Advertisement
U034
Paper timing data adjustment
(Message: Adjust Paper Timing Data)
Contents
Adjust the leading edge registration or center line.
Purpose
Executed if there is a regular error between the leading edges of the copy image and original.
Adjusted if there is a regular error between the center lines of the copy image and original.
Method
1.Press the [Start] key.
2.Select the item to adjust.
*: The screen for adjusting is displayed.
LSU Out Top Full
LSU Out Left
Adjustment: LSU Out Top Full
1.Select the item to adjust.
2.Press the [System Menu] key.
3.Press the [Start] key to output a test pattern.
4.Press the [System Menu] key.
Items
Cassette
MPT
Duplex
5.By using the [+] [-] keys or the numeric keys, change the setting value.
For the test pattern 1, increase the value.
For the test pattern 2, decrease the value.
*: When the setting value is increased, the image moves backward, and it moves forward when the set-
ting value is decreased.
Leading edge
registration
(20 ± 1.0 mm)
6.Press the [Start] key to set the setting value.
Service Manual
Items
Adjust the leading edge timing of full speed output
Adjusts the center line
Adjusts the leading edge timing for cas-
sette feed
Adjust the leading edge timing for the MP
tray
Adjust the leading edge timing for the
duplex paper feed
Correct image
Contents
Output
example 1
Figure 3-5
1-3-36
Contents
Setting range
Initial
setting
-128 to 127
15
-128 to 127
15
-128 to 127
15
Output
example 2
Data
varia-
tion
0.1mm
0.1mm
0.1mm
Y118240-1
Advertisement
Chapters
Table of Contents
