Table of Contents
Advertisement
U633
Communication control procedures 4
(Message: Communication Control 4)
Contents
Sets the FAX communication.
Purpose
Reducing the error communication when using a low quality line
Method
1.Press the [Start] key.
2.Select the item to set.
*: The screen for setting is displayed.
V.34
V.34-3429Hz
DIS 2Res
RTN Check
Setting: V.34
Sets whether to enable/disable the V.34 communication individually for transmission and reception.
1.Select the item to set.
On
TX
RX
Off
*: Initial setting: On
2.Press the [Start] key to set the setting value.
*: [Completed] is displayed.
Setting: V.34-3429Hz
Sets if the V.34 symbol speed 3429 Hz is used.
1.Select the item to set.
On
Off
*: Initial setting: On
2.Press the [Start] key to set the setting value.
*: [Completed] is displayed.
Y118240-1
Items
Enables or disables the V.34 communication.
Sets the V.34 symbol speed (3429 Hz).
Sets the number of times of DIS signal reception.
Sets the reference for the RTN signal output.
Items
V.34 communication is enabled for both transmission and reception.
V.34 communication is enabled for transmission only.
V.34 communication is enabled for reception only.
V.34 communication is disabled for both transmission and reception.
Items
V.34 symbol speed 3429 Hz is used.
V.34 symbol speed 3429 Hz is not used.
Contents
Contents
Contents
1-3-169
Service Manual
Advertisement
Chapters
Table of Contents
