U634
Communication control procedures 5
(Message: Communication Control 5)
Contents
Sets the maximum number of error bytes judged acceptable when receiving a TCF signal. Execute it as
one of measures to ease transmission conditions if transmission errors occur.
Purpose
*: Relax the communication conditions
Setting
1.Press the [Start] key.
2.Select [TCF Check].
3.By using the [+] [-] keys or the numeric keys, change the setting value.
TCF Check
4.Press the [Start] key to set the setting value.
*: [Completed] is displayed.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Y118240-1
Items
Sets the allowed error bytes when detect-
ing the TCF signal
Contents
1-3-171
Setting range
Initial
setting
1 to 255
0
Service Manual