U061
Lamp lighting check
(Message: Check Lamp ON)
Contents
Turns the exposure lamp on.
Purpose
Light the exposure lamp to confirm.
Method
1.Press the [Start] key.
2.Select the item to operate.
CCD
CIS
3.Press the [Start] key. Lamps are lit.
*: Press the [Stop] key to turn the lamp off.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Y118240-1
Items
Turns the exposure lamp on
Turn the CIS lamp on (when the simultaneous duplex scanning docu-
ment processor is installed)
Contents
1-3-43
Service Manual