Table of Contents
Advertisement
U340
Setting the applied mode
(Message: Set Applied Mode)
Description
Allocates memory to ensure that there is sufficient memory available for the printer to use as a working
area.
Purpose
Modify the memory allocation if insufficient memory for transparency support or XPS direct printing occurs.
Method
1.Press the [Start] key.
2.Select the item to set.
*: The screen for setting is displayed.
Adj Memory
Adj Max Job
Adj Custom Box
Adj Hypas Application Setting of the partition size of the Hypas Application.
setting: Adj Memory
1.By using the [+] [-] keys or the numeric keys, change the setting value.
Image
*: Set the values below in case print failure occurs with the memory shortage. (recommended value)
Image : +100
*: The work area for copy is small and it may cause output failure if the values are large.
2.Press the [Start] key. Set the setting value.
3.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
Setting: Adj Max Job
1.By using the [+] [-] keys or the numeric keys, change the setting value.
Copy
Printer
*: The maximum [Printer] jobs should be (maximum jobs) – (maximum copy jobs).
2.Press the [Start] key. Set the setting value.
Service Manual
Items
Sets the memory allocation
Setting the maximum of multiple jobs
Setting of the partition size of the Custom Box.
Items
Area temporarily used to create output image. -100 to
Items
Maximum copy (Scan To Print) Jobs
Maximum printer (Host To Print) Jobs
Contents
Contents
Contents
1-3-118
Setting
Initial setting
range
0
100(MB)
Setting
Initial setting
range
10
10 to 50
50
-
Y118240-1
Advertisement
Chapters
Table of Contents
