Setting: DIS 2Res
Sets the number of times to receive the DIS signal to once or twice. Execute it as one of the corrective
measures for transmission errors and other problems.
1.Select the item to set.
Once
Twice
*: Initial setting: Once
1.Press the [Start] key to set the setting value.
*: [Completed] is displayed.
Setting: RTN Check
Sets the error line rate to be a reference to the RTN signal transmission. If transmission errors occur fre-
quently due to the line quality, lower this setting to reduce them.
1.Select the item to set.
5%
10%
15%
20%
*: Initial setting: 15%
2.Press the [Start] key to set the setting value.
*: [Completed] is displayed.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Service Manual
Items
Responds to the first signal.
Responds to the second signal.
Items
Error line rate of 5%
Error line rate of 10%
Error line rate of 15%
Error line rate of 20%
Contents
Contents
1-3-170
Y118240-1