Table of Contents
Advertisement
U253
Switching the double/single counts
(Message: Set Double/Single Count)
Contents
Switches the count timing for the total counter and other counters by color mode.
Purpose
Select, according to user's request (copy service provider), if the maximum size paper is to be counted as
one sheet (single count) or two sheets (double count)
Setting
1.Press the [Start] key.
2.Select [Color] or [B/W].
B/W
3.Select [SGL(All)] or [DBL(Folio)].
SGL(All)
DBL(A3/Ledger)
DBL(B4)
DBL(Folio)
*: Initial setting: SGL(All)
*2: The Folio length can be set to between 330 and 356 mm using maintenance mode U035. However, the
double count will be applied when the set value is 330mm (Initial value) or longer.
4.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Service Manual
Items
Switch the counter for B/W mode (Single/Double Count)
Items
Set single count for all the paper sizes
Set single count for A3(420mm) size or smaller
Set single count for Legal(356mm) size or smaller
Set double count for Folio size or larger *2
Contents
Contents
1-3-110
Y118240-1
Advertisement
Chapters
Table of Contents
