Olivetti d-Copia 3002MF plus Service Manual page 414

(4) Detaching and reattaching the scanner wires
Follow the procedures below when the scanner wires are broken or to be replaced.
(4-1) Detaching the scanner wires
Procedures
1. Detach three screws.
2. Open the top part of the rear upper
cover, remove in the direction of the
arrow.
3. Detach four screws.
4. Open the top part of the rear lower
cover, remove in the direction of the
arrow.
Service Manual
Screw
Screw
Rear upper cover
Screw
Screw
Rear lower cover
1-5-40
Screw
Figure 1-5-64
Screw
Screw
Figure 1-5-65
Y118240-1