Olivetti d-Copia 3002MF plus Service Manual page 232

2.Press the [Start] key to set the setting value.
*: [Completed] is displayed.
Setting: TX Echo
Sets the time to send the DCS signal after the DIS signal is received. Execute when an error occurs with
echo at the transmitter side.
1.Select the item to set.
500
300
*: Initial setting: 300
2.Press the [Start] key to set the setting value.
*: [Completed] is displayed.
Setting: RX Echo
Sets the time to send the NSF, CSI or DIS signal after the CED signal is received. Execute when an error
occurs with echo at the receiver side.
1.Select the item to set.
500
75
*: Initial setting: 75
2.Press the [Start] key to set the setting value.
*: [Completed] is displayed.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Y118240-1
Items
Sends the DCS 500 ms after receiving a DIS.
Sends the DCS 300 ms after receiving a DIS.
Items
Sends the NSF, CSI or DIS 500ms after receiving the CED.
Sends the NSF, CSI or DIS 75ms after receiving the CED.
Contents
Contents
1-3-165
Service Manual