Olivetti d-Copia 3002MF plus Service Manual page 450

1-5-11 Others
(1) Detaching and reattaching the conveying unit
Procedures
1. Open the right cover 1.
2. Remove the MP wire cover and then
remove the connector.
3. Close the right cover 1.
4. Open the MP tray.
5. Remove two stop rings by using the
flat-bladed screwdriver.
6. Pull two straps upwards and remove
them.
Service Manual
Fulcrum
Stop ring
Flat
Flat screwdriver
screwdriver
1-5-76
MP wire cover
Connector
Right cover 1
Figure 1-5-129
Flat
Flat screwdriver
screwdriver
Straps
MP tray
MP tray
Figure 1-5-130
Fulcrum
Stop ring
Y118240-1