Olivetti d-Copia 3002MF plus Service Manual page 98

U026 Pulling Backup Data
(Message: Pulling Backup Data)
Contents
Execute to retrieve backup data after replacing the main PWB.
Purpose
Restores the setting values backup from the HDD to the flash memory on the main PWB.
Data is transferred from an SSD to another via a USB memory.
Method
1.Press the [Start] key.
2.Select the item to execute.
Flash
SSD
Method:Flash
1.Select [Restore].
Restore
2.Press the [Start] key.
3.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
Method:SSD
1.Select the item to execute.
Backup
Restore
2.Press the [Start] key.
3.After [Restore] completion, turn the power switch off then on. Wait more than 5 seconds between the
power off and on.
*: Indicates "NG" when completing abnormally.
Saved data:
U278 Delivery date setting
U402 margin adjustment
U952 Maintenance workflow data
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Y118240-1
Items
Updates the firmware
SSD data is backed up and retrieved when a USB memory is installed.
Items
Restore the backup data
Items
Backup the SSD data
Restore the backup data
Contents
Contents
Contents
1-3-31
Service Manual