Olivetti d-Copia 3002MF plus Service Manual page 166

U244 DP switch check
(Message: Check DP Switches)
Contents
Displays each switch and sensor status of the document processor.
Purpose
Execute to check the operation of switches and sensors of the document processor.
Method
1.Press the [Start] key.
2.Check the switches and sensors by manually turning them on/off.
*: The switch indication is inversed when the switch is detected.
Feed
Regist
Timing
CIS Head *2
Set
Longitudinal
Lift U-Limit *3
Lift L-Limit *3
Cover Open
Open
Eject *3
Branch Motor HP *1
*1: DP-7100 only, *2: DP-7110 only, *3: Except DP-7120
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Y118240-1
Items
Check DP feed sensor.
Check DP registration sensor.
Check DP timing sensor.
Check DP timing sensor.
Check DP original detection sensor.
Check DP original length sensor.
Check DP lift upper limit sensor.
Check DP lift lower limit sensor.
Check DP top cover switch.
Check DP open/close switch.
Check DP eject sensor.
Check DP feedshift sensor.
Contents
1-3-99
Service Manual