Olivetti d-Copia 3002MF plus Service Manual page 448

23. Detach one screw from operation panel
upper unit and remove the operation
panel cover a.
24. Detach two screws and then remove
the operation panel cover b.
25. Detach two screws and then remove
the operation panel cover c.
26. Remove the connector and FFC and
release from the hook.
27. Lift the protrusion of the wire guide,
slide in the direction of the arrow and
remove it.
Service Manual
Operation panel cover c
Operation panel cover a
Screw
Screw
Screw
Operation panel cover b
Connnector
FFC
Hook
1-5-74
Screw
Operation panel upper unit
Figure 1-5-126
Protrusion
Wire guide
Figure 1-5-127
Screw
Y118240-1