5. Remove three connectors.
6. Detach five screws and then remove
the drive unit 1.
7. Check or replace the drive unit 1 and
reattach the removed parts in the origi-
nal position.
*: When refitting the drive unit 1, checks
that the position of a cam is in the A side
from the upper limit line.
*: When cam isn't in the A side from the
upper limit line, turn the motor by hand
and bring the cam into the A side.
Y118240-1
Drive unit 1
Screw
Screw
Screw
Screw
Screw
Drive unit 1
Motor
1-5-27
Engine PWB
Connectors
Lift motor 1
Figure 1-5-41
Upper limit line
Figure 1-5-42
Service Manual
YC13
A
Cam