Table of Contents
Advertisement
U404
Adjusting margins for scanning an original from the docu-
ment processor
(Message: Adjust Scanning Margin(DP))
Contents
Adjusts the margins for DP scanning.
Purpose
Make the adjustment if margins are incorrect
Adjustment
1.Press the [Start] key.
2.Press the [System Menu] key.
3.Place an original on the DP and press the [Start] key to make a test copy.
4.Press the [System Menu] key.
5.Select the item to adjust.
A Margin
B Margin
C Margin
D Margin
A Margin(Back) *1 Adjusts the DP left margin (2nd side)
B Margin(Back) *1 Adjusts the DP leading edge margin
C Margin(Back) *1 Adjusts the DP right margin (2nd side)
D Margin(Back) *1 Adjusts the DP trailing edge margin
*1: Simultaneous duplex scan model only
6.By using the [+] [-] keys or the numeric keys, change the setting value.
*: When the setting value is increased, the margin widens, and it narrows when the setting value is
decreased.
7.Press the [Start] key to set the setting value.
Y118240-1
Items
Adjusts the DP left margin
Adjusts the DP leading edge margin
Sets the DP right margin
Adjusts the DP trailing edge margin
(2nd side)
(2nd side)
Printer
left margin
(2.5 +1.5/-2.0 mm)
Contents
Printer leading edge margin
(4.0 +1.5/-0 mm)
Printer
right margin
(2.5 +1.5/-2.0 mm)
Printer trailing edge margin
(2.5 +1.0/-1.0 mm)
Figure 3-19
1-3-125
Setting
Initial
range
setting
0.0 to 10.0
3.0
0.0 to 10.0
2.5
0.0 to 10.0
3.0
0.0 to 10.0
4.0
0.0 to 10.0
3.0
0.0 to 10.0
2.5
0.0 to 10.0
3.0
0.0 to 10.0
4.0
Service Manual
Data
varia-
tion
0.5mm
0.5mm
0.5mm
0.5mm
0.5mm
0.5mm
0.5mm
0.5mm
Advertisement
Chapters
Table of Contents
