Olivetti d-Copia 3002MF plus Service Manual page 44

(2) Hard Disk (HD-12): KDA standard
Installation of the hard disk requires the following parts.
Hard Disk (HD-12)
Procedures
1. Turn off the main unit and disconnect the power cord and all interface cables.
2. Detach three screws.
3. Open the upper section of the rear upper cover and detach in the direction of the arrow.
IMPORTANT
Check two gaskets are affixed to the hard disk mounting plate before installing it.
Y118240-1
Parts
Screw
Screw
Rear upper cover
Gasket
Number
1
Screw
Figure 1-2-18
Hard disk mounting plate
Gasket
Figure 1-2-19
1-2-17
Parts number
B3340 000
Service Manual