Olivetti d-Copia 3002MF plus Service Manual page 154

U207 Operation key check
(Message: Check Panel Key Operation)
Contents
Check the operation panel keys.
Purpose
Check the operation of all the keys and LEDs on the operation panel.
Method
1.Press the [Start] key to display execution window.
2.[Count 0] appears and the LED at the most left column in the operation panel is turned on.
3.Pressing the keys in order from the top at the row where the LED is lit, count increases one by one. When
pressing all the keys at the row and there is an LED at the next right side row, the LED is lit.
*: The job separator LED is lit during execution and turns off when completing.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
U221 USB host lock function setting
(Message: Set USB Host Lock Function)
Contents
Sets ON/OFF of the USB Host lock function. When setting it to on, the device connected to the USB host is
not recognized.
Purpose
Change the setting according to the user's request
Method
1.Press the [Start] key.
2.Select [Host Lock].
*: The screen for setting is displayed.
Host Lock
3.Select the item to set.
On
Off
*: Initial setting: Off
4.Press the [Start] key to set the setting value.
5.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Y118240-1
Items
Turns the USB Host lock function on/off
Items
The USB Host lock function is available
The USB Host lock function is not available
Contents
Contents
1-3-87
Service Manual