Olivetti d-Copia 3002MF plus Service Manual page 346

1-4-3 Image formation problems
If the part causing the problem was not supplied, use the unit including the part for replacement.
(1) No image
appears (entirely
white).
See page 1-4-70
(6) Black streaks
are printed verti-
cally.
See page 1-4-72
(11) The leading
edge of the
image is con-
sistently mis-
aligned with the
original.
See page 1-4-74
(16)Fusing is loose. (17)Image is out of
See page 1-4-75
Y118240-1
(2) No image
appears (entirely
black).
See page 1-4-71
(7) Streaks are
printed horizon-
tally.
See page 1-4-73
(12)The leading
edge of the
image is spo-
radically mis-
aligned with the
original.
See page 1-4-74
focus.
See page 1-4-75
(3) Image is too
light.
See page 1-4-71
(8) A part of image
is dark or light.
See page 1-4-73
(13)Paper is wrin-
kled.
See page 1-4-74
(18)Image center
does not align
with the original
center.
See page 1-4-76
1-4-69
(4) The back-
ground is col-
ored.
See page 1-4-72
(9) Spots are
printed.
See page 1-4-73
(14)Offset occurs.
See page 1-4-75
(5) White streaks
are printed verti-
cally.
See page 1-4-72
(10)Image is
blurred.
See page 1-4-74
(15)Part of image is
missing.
See page 1-4-75
Service Manual