Olivetti d-Copia 3002MF plus Service Manual page 210

Setting: DP(ChartB)
*: This setting is usually unnecessary.
Items
Lead
Main Scan
Sub Scan
1.Measure the distance "A" from the leading edge to the black belt (inside) on the adjustment original.
2.Enter the value measured in "Lead" using the the [+] [-] keys keys.
3.Measure the distance "B" from the left edge to the black belt (inside) on the adjustment original.
4.Enter the values measured in "Main Scan" using the the [+] [-] keys keys.
5.Measure the distance "C" from the leading black belt (inside) to the trailing black belt (inside) on the
adjustment original.
6.Enter the values measured in "Sub Scan" using the the [+] [-] keys keys.
7.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Y118240-1
Contents
Set the adjustment value of the
leading edge.
Sets the adjustment value of the
left edge.
Set the adjustment value of the
trailing edge.
Main Scan
Original for adjustment Chart 2-2 (P/N: AVGR11211F)
Figure 3-23
1-3-143
Setting range
14.0 to 16.0
14.0 to 16.0
388.0 to 392.0
Lead
Sub Scan
Initial Data
setting variation
15.0 0.1mm
15.0 0.1mm
390.0 0.1mm
Service Manual