Olivetti d-Copia 3002MF plus Service Manual page 28

1-2-1 Installation environment 1-2 Installation
1. Temperature: 50 to 90.5°F (10 to 32.5 °C)
2. Humidity: 15 to 80%RH
3. Usable power source: 1 220-240V AC, 6.3A
4. Frequency fluctuation: 50Hz+/-2% or 60Hz+/-2%
5. Installation location
Avoid the place exposed direct sunlight and the strong lightning. Don't expose the photoreceptor to the
direct sunlight and the strong lightning in case of the paper jam.
Avoid the locations where high temperature and humidity, low temperature and humidity and the sur-
rounding temperature of the machine rapidly change or the locations where cool wind and hot wind
expose directly.
Avoid the locations with dust and much vibration.
When setting on the stand, use the stand which can sufficiently endure in the machine weight.
Set the horizontal location. (Horizontal degree: Left and right front and rear are 5mm or less, Twisting is
3mm or less.)
Avoid the locations where the substances which can be transformed the machine and the photoreceptor
(the gas and the chlorine-based organic solvents that the vapor which the mercury, acid and alkali are, the
inorganic gas, NOx and SOx ) are drifting.
Select the good ventilated location.
6. Set the space which needed for the operation and the maintenance of the machine as following.
100 mm or more
Y118240-1
450 mm or more 1000 mm or more
Figure 1-2-1 Setting dimensions
1-2-1
500 mm or more
100 mm or more
Service Manual