Olivetti d-Copia 3002MF plus Service Manual page 538

Number Contents
F51X Abnormality detecting in a JOB execution part
F52X
F53X
F55X
F56X
F57X
F58X Abnormality detecting in the various-services
F59X Management Department
F5AX
F5BX
F5CX
F5DX
F5EX
F5FX Abnormality detecting in a service execution
part
F62X Abnormality detecting in a service execution
part
F63X Abnormality detecting in a device control sec-
tion
F68X Abnormality detecting in a storage device con-
trol section
Verification procedure & check point
1. Initialize HDD and perform an operation check.
(FULL of U024) *
2. Carry out U021 Main backup initialization and perform an operation check.
3. Exchange a Main board and perform an operation check.
4. Exchange HDD and perform an operation check.
*
5. Get USBLOG and contact service headquarters.
* Only HDD standard model
1. Initialize HDD and perform an operation check.
(FULL of U024) *
2. Carry out U021 Main backup initialization and perform an operation check.
3. Exchange a Main board and perform an operation check.
4. Exchange HDD and perform an operation check.
*
5. Get USBLOG and contact service headquarters.
* Only HDD standard model
1. Initialize HDD and perform an operation check.
(FULL of U024) *
2. Carry out U021 Main backup initialization and perform an operation check.
3. Exchange a Main board and perform an operation check.
4. Exchange HDD and perform an operation check.
*
5. Get USBLOG and contact service headquarters.
* Only HDD standard model
1. Initialize HDD and perform an operation check.
(FULL of U024) *
2. Carry out U021 Main backup initialization and perform an operation check.
3. Exchange a Main board and perform an operation check.
4. Exchange HDD and perform an operation check.
*
5. Get USBLOG and contact service headquarters.
* Only HDD standard model
1. Initialize HDD and perform an operation check.
(FULL of U024) *
2. Carry out U021 Main backup initialization and perform an operation check.
3. Exchange a Main board and perform an operation check.
4. Exchange HDD and perform an operation check.
*
5. Get USBLOG and contact service headquarters.
* Only HDD standard model
1. Initialize HDD and perform an operation check.
(FULL of U024) *
2. Carry out U021 Main backup initialization and perform an operation check.
3. Exchange a Main board and perform an operation check.
4. Exchange HDD and perform an operation check.
*
5. Get USBLOG and contact service headquarters.
* Only HDD standard model
Since the USB log immediately after occur-
rence is needed for analysis, please give
me cooperation of acquisition.
Since the USB log at the time of occur-
rence is needed for analysis, please give
me cooperation of acquisition.
Since the USB log immediately after occur-
rence is needed for analysis, please give
me cooperation of acquisition.
Since the USB log at the time of occur-
rence is needed for analysis, please give
me cooperation of acquisition.
* F684 is the overwrite error at the time of
an HDD security kit.
2-4-23
Remarks Content
F5DX (especially if X is 9,A,B,C or D)
occurs when processing FAX reception
and URDS related matter.
When occurred, check data sent from
PC.
USB log at the time of occurrence is
required for the analysis.
Each of the SSD / HDD to check the
operation after initializing. (U024 of SSD
/ FULL, U024 of HDD / FULL)