(8) USB keyboard
Bundled parts of Keyboard holder 10
Upper lid...................................................................1 pc
Lower lid...................................................................1 pc
Hook-and-loop fastener ...........................................2 pairs
Binding band ............................................................1 pc
Screws (M3x8 S-tite Black)......................................2 pcs
Screws (M3x8 P-tite)................................................2 pcs
Screws (M4x8 S-tite)
Screws (M4x8 S-tite)................................................2 pcs
*1: 4 pc is used for this model.
*2: Not used in this model.
Procedures
1. Turn the power switch off and disconnect the power plug.
2. Attach the upper keyboard mounting bracket onto the lower keyboard mounting bracket by using the
four screws.
* : Align the location of the mark A and attach.
Service Manual
?1
.............................................4 pcs
?2
Screw
Upper keyboard
mounting bracket
Lower keyboard
mounting bracket
Screw
Screw
Screw
Figure 1-2-39
1-2-30
Y118240-1