U620
FAX system
(Message: FAX System)
Contents
Sets the signal detection method for remote switching.
Change the setting according to the type of telephone connected to the main unit.
Purpose
Sets the remote switching conditions according to the user's telephone type, preference, etc.
Setting
1.Press the [Start] key.
2.Select [Remote Mode] and press the [Start] key.
Remote Mode
3.Select the item to set.
One
Cont
*: Initial setting: One
4.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Service Manual
Items
Setting the remote switching mode
Items
Sets the one-shot type detection
Sets the continuous type detection
Contents
Contents
1-3-162
Y118240-1