Olivetti d-Copia 3002MF plus Service Manual page 49

(5) Wireless LAN interface (IB-35)
Wireless LAN interface installation requires the following parts.
Wireless LAN interface kit (IB-35)
Bundled parts of Wireless LAN interface
PWB unit ..................................................................1 pc
Screw (M3x8)...........................................................1 pc
Procedures
1. Turn off the main unit and disconnect the power cord and all interface cables.
2. Detach three screws.
3. Open the upper section of the rear upper cover and detach in the direction of the arrow.
4. Slide the controller box cover in sideways, remove it.
Service Manual
Parts
Screw
Screw
Rear upper cover
Controller box cover
Number
1
Screw
Figure 1-2-25
Figure 1-2-26
1-2-22
Parts number
B3335 000
Y118240-1