Olivetti d-Copia 3002MF plus Service Manual page 240

U641 Communication time setting 2
(Message: Communication Time 2)
Contents
Sets the time-out time for the fax communication.
Purpose
Mainly, executed to improve the accuracy of communication for international communication
Method
1.Press the [Start] key.
1.Select the item to set.
T0 TIME OUT
T1 TIME OUT
T2 TIME OUT
Ta TIME OUT
Tb1 TIME OUT
Tb2 TIME OUT
Tc TIME OUT
Td TIME OUT
Setting: T0 Time Out
Sets the time before detecting a CED or DIS signal after a dialing signal is sent.
Sets to prevent disconnection of a line that occurs depending on the quality of the exchange, or when the
destination unit sets the auto switching function.
1.By using the [+] [-] keys or the numeric keys, change the setting value.
Sets the T0 time-out time.
2.Press the [Start] key to set the setting value.
*: [Completed] is displayed.
Setting: T1 Time Out
Sets the time before receiving the correct signal after call reception.
*This setting is usually unnecessary.
1.By using the [+] [-] keys or the numeric keys, change the setting value.
Sets the T1 time-out time.
2.Press the [Start] key to set the setting value.
*: [Completed] is displayed.
Y118240-1
Items
Sets the T0 time-out time.
Sets the T1 time-out time.
Sets the T2 time-out time.
Sets the Ta time-out time.
Sets the Tb1 time-out time.
Sets the Tb2 time-out time.
Sets the Tc time-out time.
Sets the Td time-out time.
Contents
Contents
Contents
1-3-173
Setting Initial
range setting
30 to 90 (s) 56
Setting Initial
range setting
30 to 90 (s) 36
Service Manual