Olivetti d-Copia 3002MF plus Service Manual page 142

U167 Clearing the fuser count
(Message: Clear Fuser Counter)
Contents
Displays and clears the fuser count.
Purpose
Verify the fuser count after replacement. Also, clear the counts after replacement.
Method
1.Press the [Start] key.
*: The fuser count is displayed.
2.By using the [+] [-] keys or the numeric keys, change the setting value.
Cnt
Clear
Method: Clear
1.Select [Clear].
2.Press the [Start] key.
*: Fuser unit counts are cleared.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
U198 Set Fuser Phase Control
(Message: Set Fuser Phase Control)
Contents
Switch the fuser phase control.
Purpose
Switch the fuser phase control.
Execution
1.Press the [Start] key.
2.By using the [+] [-] keys or the numeric keys, change the setting value.
Items
Mode
3.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Y118240-1
Items
Displays and change the fuser unit counts.
Clears the fuser count
Set the phase control mode.
Contents
1-3-75
Contents
Setting range
0 to 2
Service Manual
Initial setting
0