Olivetti d-Copia 3002MF plus Service Manual page 537

Number Contents
F46X Abnormality detecting of a printer rendering part
F47X Abnormality detecting of an image editing pro-
F48X cessing part
F49X
F4AX Abnormality detecting of a printer rendering part
F4CX
F4DX Abnormality detecting in the Entity Manage-
ment Department
F4FX Abnormality detecting in the JOB Management
Department
F50X Abnormality detecting in the FAX Management
Department
Verification procedure & check point
1. Exchange boards and perform an operation check.
2. the acquisition wish of USBLOG -- carry out
(Depending on the (2) case, it is print capture data acquisition)
* Only HDD standard model
1. Initialize HDD and perform an operation check.
(FULL of U024) *
2. Carry out U021 Main backup initialization and perform an operation check.
3. Exchange a Main board and perform an operation check.
4. Exchange HDD and perform an operation check.
*
5. Get USBLOG and contact service headquarters.
* Only HDD standard model
1. Initialize HDD and perform an operation check.
(FULL of U024) *
2. Carry out U021 Main backup initialization and perform an operation check.
3. Exchange a Main board and perform an operation check.
4. Exchange HDD and perform an operation check.
*
5. Get USBLOG and contact service headquarters.
* Only HDD standard model
1. Initialize HDD and perform an operation check.
(FULL of U024) *
2. Carry out U021 Main backup initialization and perform an operation check.
3. Exchange a Main board and perform an operation check.
4. Exchange HDD and perform an operation check.
*
5. Get USBLOG and contact service headquarters.
* Only HDD standard model
1. Initialize HDD and perform an operation check.
(FULL of U024) *
2. Carry out U021 Main backup initialization and perform an operation check.
3. Exchange a Main board and perform an operation check.
4. Exchange HDD and perform an operation check.
*
5. Get USBLOG and contact service headquarters.
* Only HDD standard model
1. Initialize HDD and perform an operation check.
(FULL of U024) *
2. Carry out U021 Main backup initialization and perform an operation check.
3. Exchange a Main board and perform an operation check.
4. Exchange HDD and perform an operation check.
*
5. Get USBLOG and contact service headquarters.
* Only HDD standard model
* F46F is the abnormalities of a printer pro-
cess.
In recurring by specific printer data, please
give me cooperation at acquisition of cap-
ture data and USBLOG.
Since the USB log immediately after occur-
rence is needed for analysis, please give
me cooperation of acquisition.
Since the USB log immediately after occur-
rence is needed for analysis, please give
me cooperation of acquisition.
2-4-22
Remarks Content
No Flash for FAX data
When OFF of the security kit that
replaced the HDD to the SSD.