Table of Contents
Advertisement
U074
Adjusting the DP input characteristics
(Message: Adjust DP Input)
Description
Sets the DP image scanning density
Purpose
Changes the setting if the background image appears when scanning bluish original or originals with
slightly thick background Adjusts the image difference between the table scanning and DP scanning CIS
scanning is not corrected.
Setting
1.Press the [Start] key.
2.Select the item to set.
3.By using the [+] [-] keys or the numeric keys, change the setting value.
Items
Coefficient
DP Color
Regist
4.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Y118240-1
Contents
DP image scanning density correction
Permitting the color registration correction opera-
tion
1-3-55
Setting range
Initial
setting
0: No correction
1
1: Low-level
2: Middle-level
3: High-level
1: On
1
2: Off
Service Manual
Advertisement
Chapters
Table of Contents
