Table of Contents
Advertisement
U343
Duplex priority mode
(Message: Set Duplex Priority Mode)
Contents
Switches between duplex or simplex copy for the initial copy mode.
Purpose
Sett the frequently used settings depending on the user's usage.
Setting
1.Press the [Start] key.
*: Select the item to set.
On
Off
*: Initial setting: Off
2.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
U345
Setting the value for maintenance due indication
(Message: Set Maintenance Time Soon Display)
Contents
Sets when to display a message notifying that the time for maintenance is about to reach, by setting the
number of prints that can be made before the current maintenance cycle reaches.
Displays the maintenance precaution message when the page count reaches the set value before the
maintenance count.
Purpose
Change the time for maintenance precaution display.
Setting
1.Press the [Start] key.
2.Select the item to set.
3.By using the [+] [-] keys or the numeric keys, change the setting value.
Cnt
SSD Life
4.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Y118240-1
Items
Duplex print priority is enabled
Duplex print priority is disabled
Items
Setting the maintenance time precaution display
(Remaining number of prints that can be made
before the current maintenance cycle reaches)
Setting the maintenance time precaution display
for the SSD replacement.
Contents
Contents
1-3-121
Setting
Initial set-
range
ting
0 to 9999
0
0 to 99
5(%)
Service Manual
Advertisement
Chapters
Table of Contents
