Olivetti d-Copia 3002MF plus Service Manual page 413

5. Move the exposure unit to the cutting
lack part.
6. Peel off the sheet.
7. Release the hook and then remove the
FFC cover.
8. Remove the FFC from the connector.
9. Detach two screws and then remove
the LED unit.
10. Check or replace the LED unit and reat-
tach the removed parts in original posi-
tion.
Y118240-1
Hook
LED unit
Screw
1-5-39
Exposure unit
Figure 1-5-62
Screw
Figure 1-5-63
Service Manual
FFC cover
Sheet
FFC