Olivetti d-Copia 3002MF plus Service Manual page 231

U630 Communication control procedures 1
(Message: Communication Control 1)
Contents
Sets the FAX communication.
Purpose
Sets the following to correspond to field claims
Reducing the transmission time to improve the accuracy of reception when using a low quality line
Improving the accuracy of communication during the international communication
Method
1.Press the [Start] key.
2.Select the item to set.
*: The screen for setting is displayed.
Setting: TX Speed
Sets the transmission speed of the sender. When the destination unit has the V.34 capability, V.34 is
selected for transmission regardless of this setting.
1.Select the communication speed.
14400bps/V17
9600bps/V29
4800bps/V27ter
2400bps/V27ter
*: Initial setting: 14400bps/V17
2.Press the [Start] key to set the setting value.
*: [Completed] is displayed.
Setting: RX Speed
Sets the reception capacity to advise the transmitter by the DIS/NSF signal. When the destination unit has
the V.34 capability, V.34 is selected for transmission regardless of this setting.
1.Select the reception speed.
14400bps
9600bps
4800bps
2400bps
*: Initial setting: 14400bps
Service Manual
Items
TX Speed
RX Speed
TX Echo
RX Echo
Items
V.17 14400bps
V.29 9600bps
V.27ter 4800bps
V.27ter 2400bps
Items
V.17, V.33, V.29, V.27ter
V.29, V.27ter
V.27ter
V.27ter (fallback only)
Sets the communication starting speed.
Sets the reception speed.
Sets the waiting period to prevent echo problems at the
sender.
Sets the reception speed.
Contents
Contents
1-3-164
Contents
Y118240-1