Olivetti d-Copia 3002MF plus Service Manual page 242

Sets the time to start ringing for an operator through the external telephone after receiving a call in the FAX/
telephone automatic switching mode. (See figure 1-3-27). Execute when a reception error occurs when in
the automatic FAX/telephone switching.
1.By using the [+] [-] keys or the numeric keys, change the setting value.
Sets the Tb2 time-out time.
2.Press the [Start] key to set the setting value.
*: [Completed] is displayed.
Setting: Tc Time Out
In the TAD mode, set the time to check if there are any triggers for shifting to FAX reception after a con-
nected handset receives a call. Unless switched to FAX reception during this period, operated as a normal
phone after this.
In the TAD mode, change the setting when fax reception is unsuccessful or a telephone fails to receive a
call.
1.By using the [+] [-] keys or the numeric keys, change the setting value.
Sets the Tc time-out time.
2.Press the [Start] key to set the setting value.
*: [Completed] is displayed.
Setting: Td Time Out
Sets the length of time to determine silent status, one of the triggers for Tc time check.
In the TAD mode, change the setting when fax reception is unsuccessful or a telephone fails to receive a
call. Be sure not to set too short, otherwise the mode may be switched to fax while the unit is being used as
a telephone.
1.By using the [+] [-] keys or the numeric keys, change the setting value.
Sets the Td time-out time.
2.Press the [Start] key to set the setting value.
*: [Completed] is displayed.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Y118240-1
Contents
Contents
Contents
1-3-175
Setting Initial
range setting
1 to 255 80
Setting Initial
range setting
1 to 255 s 60
Setting Initial
range setting
1 to 255 6
Service Manual