Table of Contents
Advertisement
U698
Setting the maintenance port
(Message: Set Port for Maintenance)
Contents
Sets the port applicable to the maintenance mode.
Purpose
Sets the maintenance mode target port when installing multiple ports .
Setting is unnecessary if the same contents are set for both ports. Sets only when different items are set for
each port.
*: This maintenance mode only appears when the multiple ports are installed.
Setting
1.Press the [Start] key.
2.Press [Port Select].
*: Current setting display is inverted.
3.Select the item to set.
ALL
PORT 1
PORT 2
4.Press the [Start] key to set the setting value.
Precautions
These contents to set are cleared when exiting the maintenance mode or turning the power off and the set-
tings are necessary when entering the maintenance mode.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Y118240-1
Items
All ports
Port 1 (FAX PWB port)
Port 2 (Optional multiple port)
Contents
1-3-183
Service Manual
Advertisement
Chapters
Table of Contents
