Olivetti d-Copia 3002MF plus Service Manual page 301

Code Contents
2000 Main motor steady-state
error
After main motor is stabilized,
the ready signal is at the H
level for 2 s continuously.
2010 Main motor startup error
Main motor is not stabilized
within 1 s since the motor is
activated.
Service Manual
Related parts
Main motor
Engine PWB
Main motor
Engine PWB
1-4-24
Check procedures/
corrective measures
1. To check the motor operation execute
U030 Main (main motor) (see page 1-3-
32).
2. Check the drive gear can rotate or they
are not unusually loaded and, if neces-
sary, replace.
3. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way in.
Main motor and Engine PWB (YC13)
4. If the wiring is disconnected, shorted or
grounded, replace the wiring.
5. Replace the main motor.
1. Check the engine software and upgrade
to the latest, if necessary.
2. Replace the engine PWB (see page 1-5-
58).
1. To check the motor operation execute
U030 Main (main motor) (see page 1-3-
32).
2. Confirm that the wiring connector is
firmly connected and, if necessary, con-
nect the connector all the way in.
Main motor and Engine PWB (YC13)
3. If the wiring is disconnected, shorted or
grounded, replace the wiring.
4. Replace the main motor.
1. Check the engine software and upgrade
to the latest, if necessary.
2. Replace the engine PWB (see page 1-5-
58).
Y118240-1