Table of Contents
Advertisement
Performing a System
Test
Figure 51 Test: SysTest
Library Screen
Testing the Library
The Test section of the Service screen provides three options:
SysTest Library
•
Operate Axes (not currently supported)
•
Service Calibrate
•
Note: The commands in the Test section of the Service screen are operational
only when the library is in Standby mode.
To perform a system test:
5
Procedure
On the Service screen, press the SysTest Library button.
1
The GUI displays the Test: SysTest Library screen (see figure 51).
ATL
P R O D U C T S
System
Off-line
Standby
Load Port
Load Pack
S
Stop
Select one of the following system test options:
2
•
To test storage bins only, press the Swap Bins button.
To test drives only, press the Swap Drives button.
•
To test both bins and drives, press both the Swap Bins and
•
Swap Drives buttons.
ATL P1000 Series User's Guide
Back
Forward
Operator
Test: Systest Library
Random
Swap
Bins
Swap
Drives
Use
Barcodes
Chapter 5 Service Commands
Testing the Library
Home
Tapes
Service
1
3
# of Runs:
5
_
7
Continuous
9
Execute
Select
5
2
4
6
8
0
79
Advertisement
Table of Contents
