Back Panel
Figure 8 Back Panel,
Stand-alone Library
Host SCSI port
Power connector
Drive 1 SCSI ports
Drive 3 SCSI ports
The back panel of the P1000 (see figure 8) has the following
1
components:
SCSI ports
•
•
RS-232C diagnostic (DIAG) port
power connector
•
drive access (hot swap)
•
air filters
•
These components provide the P1000 with power and communication
links to external systems.
ATL P1000 Series User's Guide
Chapter 1 Library Description
Operator-Accessible Components
Actuator driver card
Robotics controller card/
DIAG port
Drive 0 SCSI ports
Drive 2 SCSI ports
Air filter
11