Chapter 4 Operator Commands
Unloading the Load Port
Unloading the Load Port
4
The Unload Imp/Exp command moves a tape cartridge from the load
port to an available storage bin. Use this command to move a tape
cartridge from the load port when the Auto Load option is disabled
(see "Configuring Library Options" on page 62).
Note: You can also use the Move Cartridges command to unload the load
port (see "Moving a Cartridge" on page 64). This command is
especially useful if the destination of the move is important.
To unload the load port using the Unload Imp/Exp command, press
the Unload Imp/Exp button on the Operator screen. The GUI displays
a "Command In Progress" screen. To cancel the Unload Imp/Exp
command, press the Abort button.
ATL P1000 Series User's Guide
71