Gui Screens; Figure 31 Gui Screens; Table 6 Gui Screens - Quantum P1000 Series User Manual

Table 6 GUI Screens

GUI Screens

Figure 31 GUI Screens

Table 6 describes each of the GUI screens.
Screen
Overview
Tapes
Operator
Service
Prism Router
Figure 31 shows the commands that are available on the Overview,
3
Tapes, Operator, and Service screens.
Overview
Tape Drive Status
Activity
Load Pack
ATL P1000 Series User's Guide
Description
This screen provides an overview of the tape
drives, robot activity, and load pack inventory.
This screen displays the contents of the tape
drives, storage bins, load packs, the gripper, and
the load port.
This screen contains the library configuration and
control functions. To use this screen, you must
have Operator or Service access privileges.
This screen contains reporting functions, system
tests, and miscellaneous commands. To use this
screen, you must have Service access privileges.
This screen contains options related to the
optional Prism FC210 Router. For information
about these options, see the ATL Prism FC210
Router Addendum (PN 6331101).
Tapes Operator
Drives Configure Library
Storage Configure Options
Load Pack Move Cartridges
Transport Inventory Tapes
Load Port Calibrate Library
Exercise Library
Unload Drive
Unload Imp/Exp
Chapter 3 Basic Operations
Using the GUI
Service
Statistics
Actuator
Sys Test Library Results
Auto Clean
Sys Test Library
Operate Axes
Service Calibrate
Initialize Nonvol Statistics
Initialize Nonvol Config.
Change Password
45