Table of Contents
Advertisement
Glossary
H
L
M
N
O
P
S
110
horizontal belt The drive belt connecting the horizontal motor to the
horizontal axis assembly.
host computer The computer that issues SCSI commands to control
the library robotics.
LCD Liquid crystal display.
load pack An 8-bin removable storage magazine for tape cartridges.
The load pack fits inside the left front door of the P1000 library. You
can configure this magazine to function as an import/export device, if
desired.
load port The operator-accessible component of the library that
allows you to insert or remove a single cartridge.
MSBF Mean swaps between failures.
MTBF Mean time between failures.
MTTR Mean time to repair.
NVRAM Nonvolatile random access memory (RAM)
on-line When the library is on-line, it is ready for communications
with the host.
pick The act of removing a cartridge from one location in preparation
for placing it in another location.
place The act of placing a cartridge in a location after it has been
picked from another location.
PROM Programmable read-only memory (ROM).
SCSI Small computer system interface. A communications standard
for attaching peripheral equipment to computers.
standby mode The state in which the library is not available for
communication with the host.
ATL P1000 Series User's Guide
Advertisement
Table of Contents
